Andrew Mansfield, Head of Flow Chemistry, Syrris
Famous chemistry professors are doing it. Magazines are writing about it. Students are focusing on it. Research and development chemists are perfecting reactions with it, and scale-up chemists are producing products with it.
You’ve undoubtedly heard about flow chemistry, but unless you’ve used our R&D100 Award-winning Asia Flow Chemistry System, you might still be wondering – what, exactly, is flow chemistry?
The basics of flow chemistry
Though it goes by a number of names – “plug flow chemistry”, “microchemistry”, and “continuous flow chemistry” – the principles of flow chemistry are the same.
Flow chemistry is the process of performing chemical reactions in a tube, capillary or micro structured device (a flow reactor).
What this means is that reactive components are pumped first through a mixing device, either
Further to maintaining a fixed temperature to promote a reaction flow chemistry lends itself perfectly to using photon or electron flux to mediate continuous reactions.
The differences between plug flow and continuous flow chemistry
Though often used interchangeably, there is a small difference between “plug flow chemistry” and “continuous flow chemistry”.
Continuous flow chemistry is just that – continuous. The reactive materials are continuously pumped with no breaks, resulting in a continuous stream of chemicals, and therefore a continuous stream of
Plug flow chemistry is where alternating “plugs” of reactive materials and solvent are pumped, where each plug is considered as a separate entity (a discrete reaction mixture). These plugs never meet – they are separated by the system solvent – so the conditions in which they go through the flow chemistry system (i.e. temperature, stoichiometry, residence time etc.) can be changed to observe how the reaction changes.
Plug flow lends itself well for method development, reaction optimization, and library synthesis, where smaller amounts of material are required.
Intelligent systems, such as the Asia Flow Chemistry System, can automate these processes. Automation enables a range of reaction conditions, reagents or analogs to be explored with the automated collection of individual plugs, sending the product into one collection vial and the solvent to waste.
What is a mixing junction?
So what do we mean by a “mixing junction”? A mixing junction is where our reagent streams meet before flowing into our flow reactor. Often this is a simple t-piece but if faster more efficient mixing is required, e.g. for reactions needing
When a fluid is flowing through a closed channel such as a flow reactor, either of two types of flow may occur depending on the velocity and viscosity of the fluid: laminar flow or turbulent flow. Laminar flow tends to occur at lower velocities, below a threshold at which it becomes turbulent. Turbulent flow is a less orderly flow regime that is characterized by eddies or small packets of fluid particles, which result in lateral mixing. In non-scientific terms, laminar flow is smooth, while turbulent flow is rough.
Mixing in laboratory scale flow systems such as Asia mixing will occur through the lateral mixing regime of laminar flow. Diffusion mixing can be slow however the diameter of the tubing used on these scales is small and diffusive mixing is very significant, and more notably reproducible.
When rapid mixing is required, e.g. in reactions that require fast mass transfer, turbulent flow is necessary. Turbulent mixing is generated in flow generally by a micromixer (static mixer) of some type.
What types of flow reactors are available?
A flow reactor is essentially the equivalent of a round-bottomed flask or a jacketed reactor – it’s where the reaction occurs in a flow chemistry system.
As described earlier two (or more) separate solutions of reactive compounds are brought together, mixed and flowed through a single, temperature-controlled channel in order to
Flow reactors come in a variety of shapes and sizes, but they all perform the same role: to allow chemical reactions to take place continuously. There are a few characteristics that flow reactors should aim to provide:
- Flexibility in volume to allow a large range of residence (reaction) times
- Excellent mixing
- Excellent heat transfer
- Good visibility where possible
- Ability to perform different types of chemistry (i.e. Homogeneous and heterogeneous)
The common types of flow reactor are outlined below and are all available with the Syrris Asia Flow Chemistry System.
Glass microreactor chips
Glass microreactor chips are the most commonly known type of reactor used in a flow chemistry system. A piece of glass is “etched” with a particular design (depending on the application); the design helps determines how wide the mixing channel is and how the mixing occurs. A longer channel enables a longer residence time than a shorter channel (assuming the pump flow rate is the same).
Glass microreactor chips are inserted into chip climate controllers which maintain a set temperature throughout the entire chip and are the perfect system for chemists just starting out in flow chemistry.
Asia Glass Microreactor Chip .
Tube reactors are effectively long tubes wrapped around a heated or cooled coil. The large length of the coil offers far longer residence times than glass microreactor chips (or much faster pump flow rate) if the application requires it.
Tube reactors are available in different materials, depending on the application. Material such as PTFE allows good visibility of the flow reaction but are limited for high-temperature reactions. Stainless Steel and Hastelloy enable higher temperatures and pressures to be achieved.
Column reactors are typically glass columns and allow heterogeneous chemistry to be performed, small diameter tubes don’t like having solids passed through them. Solid-supported reagents, catalysts, enzymes, and scavengers can be employed – this will be explored in further blog posts.
So why are chemists adopting flow chemistry into their reactions?
By saying flow chemistry is essentially one more tool to add to the chemist’s tool-box does not do this synthetic technique the justice it deserves. Flow chemistry techniques allow the precise control of reaction conditions such as stoichiometry, mixing, temperature control, and reaction time. Controlling these factors gives excellent reaction control often leading to greater yields and better selectivity.
There are a number of reasons chemists across all industries are introducing or switching to, continuous flow chemistry, but in short, the main benefits are;
So now you know what flow chemistry is, how it works, and the different types of mixing junctions available. But if you’re performing chemistry in batch at the moment, why would you bother switching to continuous flow? The “why perform your chemistry in continuous flow?” blog post explains the 9 main reasons chemists in various industries are adopting flow chemistry into their labs.
Asia Flow Chemistry System
Asia is a revolutionary range of advanced flow chemistry products from Syrris. It has been designed by chemists for chemists to enable the widest variety of chemical reactions and ultimate ease of use
Asia Flow Chemistry System
About Andrew Mansfield
Andrew was formerly a Research Chemist at Pfizer and spent much of his career focusing on introducing flow chemistry technologies, meaning Andrew is well placed to lead Syrris’ flow chemistry offering. Read Andrew’s bio here.
Follow us on social media to be kept up-to-date on Syrris and other industry news
Over the past 5 years or so the development of continuous flow electrochemical cells has made selective syntheses with high reactant-to-product conversions possible. These devices offer an easy access to electrochemical techniques which is driving its current re-assessment as a viable, attractive synthetic method. Discover more in this blog post.
Continuous flow biocatalysis is fast becoming a key area of focus for chemists with applications in fine chemicals, drugs, biotherapeutics, and biofuels to name a few. This is reflected in the rapidly-growing number of publications and patents featuring continuous flow biocatalysis; this blog post explores why.
We’ve seen rapidly increasing interest in flow chemistry systems from companies and universities specializing in nanoparticle synthesis. Offering greatly improved reaction control, mixing, process flexibility, and reproducibility, it’s easy to see why many chemists are switching to continuous flow. Read more here…
From improving efficiency to reducing cost and waste, chemists are looking for new ways to improve the efficiency of polystyrene production and continuous flow polymerization could well be the answer…